Go back ←

Payne® – 92% AFUE Single-Stage 40000 Btuh ECM Condensing Gas Furnace

2,900,00$

Description

*** Garantie valable si installée par une compagnie certifiée Carrier

Payne® – 92% AFUE Single-Stage 40000 Btuh ECM Condensing Gas Furnace

The PG92ESA Multipoise Condensing Gas Furnace features single-stage gas valve and ECM blower motor. This furnace provides electrical efficiency with a fixed-speeds, constant torque (FCT) ECM blower motor. With an Annual Fuel Utilization Efficiency (AFUE) of 92.1%, the single-stage gas furnace provides added savings over standard, non-condensing gas furnaces. This Gas Furnace features 4-way multipoise installation flexibility, and is available in eight model sizes. The PG92ESA can be vented for direct vent/two-pipe, ventilated combustion air, or single-pipe applications. Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement. All sizes are design certified in Canada. All sizes are design certified for use in Manufactured Housing (Mobile Home) applications when used with factory-approved MH accessory kit.

PERFORMANCE

  • Fixed-speeds, constant torque (FCT) ECM blower motor for electrically efficient operation all year long in heating, cooling and continuous fan operation
  • Single-speed inducer motor, and single-stage gas valve
  • Silicon Nitride Robust Hot Surface Igniter.
  • Adjustable blower speed for heating and cooling.
  • Aluminized-steel primary heat exchanger.
  • Stainless-steel condensing secondary heat exchanger.

INSTALLATION FLEXIBILITY

  • 4-way multipoise design for upflow, downflow or horizontal installation, with unique vent elbow for 12 different venting options, including optional venting through-the-cabinet downflow venting capability.
  • Factory-configured ready for upflow applications.
  • Ideal height 35″ (889 mm) cabinet: short enough for taller coils, but still allows enough room for service.
  • Direct-vent/sealed combustion, single-pipe venting or ventilated combustion air.

APPLICATIONS

  • Approved for Manufactured Housing/Mobile Home applications with MH accessory kit.
  • Propane convertible with gas conversion accessory.

CERTIFICATIONS

  • All sizes meet ENERGY STAR® South regional standards.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193.
  • All sizes meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement

Specifications

Dimensions
Length 29.5 Inches (In)
Width 14.2 Inches (In)
Height 35 Inches (In)
Weight 112 Pounds (lbs)
Attributes
AFUE 92%
Air Flow Multi-Position
BTU Input 40000
BTU Output 37000
Blower Motor HP 1/2 HP
Blower Motor RPM 600-1200
Blower Motor Speeds 5 (Five)
Blower Motor Type ECM (Electronically Commutated Motor)
Blower Wheel 11″ x 7″
Brand Payne
CFM 765
Cabinet Width 14.2
Circuit Breaker – Max Amps 15
Color Gray
Country Of Origin USA
Cycle/Hertz 60 Hz
ETL Listed No
Energy Star Rated No
FER Compliant Yes
Filter Size No Filter Included
Fuel Type Natural Gas or LP
Full Load Amps 6.4
Gas Connection 1/2″ [12.7 mm] N.P.T.
Gas Connection Size 1/2″
Ignition Type Hot Surface (HSI)
Includes Filter Rack No
Phase Single
Product Family PG92ESA
Prop 65 Yes
UL Listed No
Voltage 115 VAC

Part no.

PG92ESAA30040A
Category: