Go back ←

Payne® – 95% AFUE 60000 Btuh ECM Condensing Gas Furnace

2,570,00$

Description

*** Garantie valable si installée par une compagnie certifiée Carrier

Payne® – 95% AFUE 60000 Btuh ECM Condensing Gas Furnace

The PG95ESAA Multipoise Condensing Gas Furnace features a single-stage gas valve and a fixed-speeds, constant torque (FCT) ECM blower motor. With an Annual Fuel Utilization Efficiency (AFUE) of up to 96.0% this furnace provides added savings over standard gas furnaces. It features 4-way multipoise installation flexibility, and is available in ten model sizes. All sizes except the 26,000 BTUH model can be vented for direct vent/two-pipe, ventilated combustion air, or single-pipe applications. The 26,000 BTUH model can use the same 2-pipe venting system using outside air for combustion, but is not considered direct-vent. All sizes are design certified in Canada, and select sizes are certified for mobile/manufactured home use with conversion kit accessory.

PERFORMANCE

  • Fixed-speeds, constant torque (FCT) ECM blower motor for electrically efficient operation all year long in heating, cooling and continuous fan operation.
  • Single-speed inducer motor, and single-stage gas valve
  • Silicon Nitride Hot Surface Igniter.
  • Adjustable blower speed for heating and cooling.
  • Aluminized-steel primary heat exchanger.
  • Stainless-steel condensing secondary heat exchanger.

INSTALLATION FLEXIBILITY

  • 4-way multipoise design for upflow, downflow or horizontal installation, with unique vent elbow and optional through-the-cabinet downflow venting capability.
  • Factory-configured ready for upflow applications.
  • Ideal height 35″ (889 mm) cabinet: short enough for taller coils, but still allows enough room for service.
  • Two-pipe venting, single-pipe venting or ventilated combustion air.

APPLICATIONS

  • Approved for Twinning applications with accessory kit (42060B through 60100C models, only).
  • Approved for Manufactured Housing/Mobile Home applications with MH accessory kit. (30040A through 66120D models, only).
  • Propane convertible with gas conversion accessory kit.

CERTIFICATIONS

  • All sizes meet ENERGY STAR® Version 4.1 criteria for gas furnaces: 95%+ AFUE.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193.
  • All sizes meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement

Specifications

Dimensions
Length 29.5 Inches (In)
Width 17.5 Inches (In)
Height 35 Inches (In)
Weight 164.4 Pounds (lbs)
Attributes
AFUE 95%
Air Flow Multi-Position
BTU Input 60000
BTU Output 58000
Blower Motor HP 3/4 HP
Blower Motor RPM 400-1200
Blower Motor Speeds 5 (Five)
Blower Motor Type ECM (Electronically Commutated Motor)
Blower Wheel 11″ x 8″
Brand Payne
CFM 1010
Cabinet Width 17.5
Circuit Breaker – Max Amps 15
Color Gray
Country Of Origin USA
Cycle/Hertz 60 Hz
ETL Listed No
Energy Star Rated Yes
FER Compliant Yes
Filter Size No Filter Included
Fuel Type Natural Gas or LP
Full Load Amps 8.8
Gas Connection 1/2″ [12.7 mm] N.P.T.
Gas Connection Size 1/2″
Ignition Type Hot Surface (HSI)
Includes Filter Rack No
Phase Single
Product Family PG95ESA
Prop 65 Yes
UL Listed No
Voltage 115 VAC

Part no.

PG95ESAA42060B
Category: