Payne® – 3 Ton, Resident Fan Coil, Multipoise (Aluminum Coil)

PF4MNP036L00
P = Payne / Brand
F = Fan Coil / Product
4 = R-410A / Refrigerant
M = Multipoise / Position
N = 208/230-1-60 / Electrical
P = TXV / Metering Device
036 = 36,000 / Capacity
L = Aluminum / Coil Type
00 = No Heating / Heating SizeThe PF4MNP fan coil has proven technology with R-410A refrigerant as well as vertical and horizontal applications. The design features contoured condensate pans with rugged drain connections, ensuring that little water is left in the unit at the end of the cooling duty cycle. The lack of standing condensate and corrosion free pans improves IAQ and product life, features homeowners appreciate.
Standard features include grooved tubing and louvered fins. Coil circuiting has also been updated to make the most of all heat pumps and air conditioners. Units come with solid state fan controls, 1-inch (25mm) thick insulation with R-value of 4.2, multi-speed motors, and fully-wettable coils. Units can accommodate factory and/or field-installed heaters from 3 to 30 kW.

The PF4MNP fan coil design is loaded with popular features. These fan coils utilize the latest in electronic commutation motor (ECM) technology through the use of high efficiency, multi-tap ECM motors allowing reliable air delivery with increased static pressure. It comes in a pre-painted (taupe metallic) galvanized steel casing and a factory-supplied power plug for ease of installation. The PF4MNP unit is shipped with an R-410A refrigerant TXV. In order to meet the California Title 24 requirement of 1.4% air leakage at 0.5” water, an accessory kit is available.

STANDARD FEATURES

• Multi-tap ECM (electronic commutating motor) motors – all sizes
• Integrated motor controls, with 90-sec off TDR function, have replaced integrated circuit board
• Five available speed taps to meet a wide range of applications
• Large, grooved tube, louvered fin coils
• Efficient, quiet, time–tested blower housings and diffusers
• Sturdy, drainable condensate pans
• Cabinet construction features innovations designed to prevent cabinet sweating
• Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements
• Super-thick R-4.2 insulation with vapor barrier
• Pre-painted galvanized steel cabinet (taupe metallic)
• Installation-flexible, multipoise units
• Horizontal hanging provisions on cabinet
• No tools required to access filter
• Newly improved filter rack area filter door insulation added for improved air seal
• Factory-installed heater packages available on select models (5 through 15-kW)
• 3 through 30-kW accessory heaters – field installed
• Factory-supplied power plug
• Easy plug-in provisions for heater installation
• Entry options for high and low voltage wiring hook-up
• Leak-preventing sweat connections
• Thermostatic expansion valve, TXV, on all coils
• Designed for manufactured housing applications